McIntosh Audio Control Center C45 User Manual

Page 29

FM Antenna

1. Connect the Remote AM antenna by plugging the DIN

connector of the supplied 3 conductor cable into the AM
ANT, DIN socket on the back panel of the C45.

Note: If a longer length cable needs to be used between

the C45 and the RAA1, use a 2 conductor shielded
cable. Refer to page 4 for additional connection
information.

2. Connect a 75 ohm coax cable from an FM antenna or

cable system to the C45, 75 ohm FM ANT connector.

How to Connect Antenna Components