Meco 6623S8E641 User Manual
Page 21
21
Step 24
A. Drip Cup Assembly
Insert the Drip Cup into the hanger wire underneath the grill bowl.
B. Cylinder Retainer Wire Assembly
Position the Cylinder Retainer Wire as shown. Insert the legs of the retainer wire into the holes in the legs just below the
joint. Allow wire to drop into position, curve toward the center of the cart and parallel to the floor.
Step 25
Battery in Igniter Installation
Unscrew Igniter Cover and insert AA Battery with the negative “-“ end going in first. Replace the cover and tighten
securely.
Battery
AA 1.5v Alkaline
1 pc
This Completes the Grill Assembly.
NOTE: Verify ALL hardware is tightened Securely.
A
B