Philips DVD710AT - Manual (Page 39)

Audio Settings (cont’d) 39
4
To change the PCM, DOLBY DIGITAL, or DTS settings,
press the corresponding Number button to select the
desired item, then press the Number button to choose
the setting (i.e. ON or OFF).
SETUP/AUDIO
PCM
1. 48kHz
2. 96kHz
• Audio signals are converted to
48 kHz/16 bit signals when playing
a DVD recorded with high sound quality
(48 kHz/20 bit/24 bit, 96 kHz).
• Sound is reproduced at 96 kHz if a DVD
is recorded with high sound quality. If you
are playing 48 kHz discs or if 4:3 LETTER
BOX is selected, sound is reproduced
at 48 kHz.
Enter, Back Exit
5
4
SETUP MODE DISPLAY
CLEAR +10
3
6
9
0
2
5
8
1
4
7
SKIP SEARCH MODE
TITLE
ENTER
POWER
MENU
STOP
PLAY FWD REV
RETURN
A-B
REPEAT PAUSE/STILL
AUDIO SUB TITLE ANGLE
OPEN/
CLOSE
SETUP/AUDIO
DOLBY DIGITAL
1. OFF
2. ON
• Select ON when a Dolby Digital decoder is used.
Enter, Back Exit
SETUP/AUDIO
DTS
1. OFF
2. ON
• Select ON when a DTS decoder is used.
Enter, Back Exit
5
Press the SETUP button to remove the menu.