Philips DVD710AT - Manual (Page 29)

Programmed Playback 29
You may determine the order in which Tracks will play. The order
that you set is called the Program. To set up programmed play-
back, follow these steps.
1
While playback is stopped, press the MODE button. The
program screen will appear.
PROGRAM
T [_ _] / 14 TOTAL 0h00m00s
Start, Delete Exit
2
Press the Number buttons or the o/p buttons to enter
the number of the first Track that you want to play.
Then, press the ENTER button to store the selected
Track in the Program.
● If you enter a wrong Track number, press the CLEAR button.
The last Track in the Program will be removed.
3
Repeat step 2 until you have selected all the Tracks you
wish to play in the Program.
● Up to 20 Tracks may be stored in the Program.
● Make sure the Track numbers you enter are available on the
Audio CD. If it is not, you will have to enter a different track.
PROGRAM
T [_ _] / 14 TOTAL 0h07m46s
01: 12
Start, Delete Exit
4
Press the PLAY button. The Tracks will play in the order in
which you programmed them. The Program will play once.
● The contents of the program will be stored until you turn off
the DVD Player or open the Disc tray.
• Specific Track and random playback
cannot be combined with pro-
grammed playback. During pro-
grammed playback, the MODE and
SEARCH MODE buttons will not
operate.
• You may play a Program repeatedly.
During programmed playback, press
the REPEAT button so that REPEAT
[ON] appears. The program will
play over and over.
• To see which Tracks you stored in
the Program, press the STOP button
to stop playback, then press the
MODE button so that the PRO-
GRAM screen appears.
• Programmed playback can only be
started from the program screen.
Helpful Hints
1
4
2-3
SETUP MODE DISPLAY
CLEAR +10
3
6
9
0
2
5
8
1
4
7
SKIP SEARCH MODE
TITLE
ENTER
POWER
MENU
STOP
PLAY FWD REV
RETURN
A-B
REPEAT PAUSE/STILL
AUDIO SUB TITLE ANGLE
OPEN/
CLOSE
AUDIO CD
position in program track number