Philips DVD710AT - Manual (Page 31)

Audio Language/Sound Mode 31
• If a desired language is not shown
after pressing the o/p buttons sev-
eral times, the DVD does not have
that language.
• The display will disappear after
about 15 seconds.
• Some DVDs only allow you to
change the language in the Disc
menu.
• When you use the DIGITAL AUDIO
OUT COAXIAL jack, the sound mode
of audio CDs cannot be changed.
Helpful Hints
The DVD Player allows you to select a Language for DVDs or a
Sound Mode for Audio CDs.
1
Press the AUDIO button during playback, then press the
o
/p buttons to select the desired language.
● The language can be changed only if multiple languages are avail-
able on the DVD.
1
Press the AUDIO button during playback, then press the
o
/p buttons until the sound mode you want appears.
● When producers record an Audio CD, they record the sound
on two channels - the left and the right. You can choose to hear
the sound on the left channel, the sound on the right channel,
or the sound on both channels (Stereo). You will select L-CH,
R-CH, or STEREO.
AUDIO 1 : E N G / 8
AUDIO 2 : F R E / 8
AUDIO 8 : J P N / 8
HELLO BONJOUR
➜ •••
AUDIO 1 AUDIO 2
Only the right channel is active.
AUDIO R - C H
Only the left channel is active.
AUDIO L - C H
Both right and left channels
are active (stereo).
AUDIO S T E R E O
SETUP MODE DISPLAY
CLEAR +10
3
6
9
0
2
5
8
1
4
7
SKIP SEARCH MODE
TITLE
ENTER
POWER
MENU
STOP
PLAY FWD REV
RETURN
A-B
REPEAT PAUSE/STILL
AUDIO SUB TITLE ANGLE
OPEN/
CLOSE
DVD
AUDIO CD
1
Language
Sound Mode
Press the o/p buttons.
Press the o/p buttons again.
Press the o/p buttons again.