Philips DVD710AT - Manual (Page 26)

1
Press the SEARCH MODE button repeatedly (three times
for DVDs or two times for Audio CDs).
2
Use the Number buttons to enter the Disc time at which
you want playback to begin.
● Example: 1 hour, 23 minutes and 30 seconds
1 → +10 → +10 → 3 → +10 → +10 → +10 → 0
● To enter zero, press the Number 0 (zero) button or press the
B
button.
● Make sure the time you enter is within the total time of the
Disc. If it is not, you will have to enter a different time.
● If you make a mistake, press the B button repeatedly until you
reach the item you need to correct (hour, minute, or second),
then enter the correct information.
3
Within 30 seconds, press the PLAY button. Playback will
start at the time that you specified.
Starting Playback at a Specific Disc Time
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [ _h_ _m_ _s ]
Exit Start
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [1h05m30s]
Start Exit
26 Specific Time Playback
SETUP MODE DISPLAY
CLEAR +10
3
6
9
0
2
5
8
1
4
7
SKIP SEARCH MODE
TITLE
ENTER
POWER
MENU
STOP
PLAY FWD REV
RETURN
A-B
REPEAT PAUSE/STILL
AUDIO SUB TITLE ANGLE
OPEN/
CLOSE
DVD AUDIO CD
1
2
3
• Specific time playback is not avail-
able with some discs or if MEMORY
OFF is activated for a DVD. Details
are on page 20.
Helpful Hint