beautypg.com

Connections, Connecting the ac cord – Philips Magnavox NB500MG9 User Manual

Page 16

background image

16

EN

CONNECTIONS

Audio signals output from DIGITAL OUT jack (COAXIAL)

The audio signals currently output from HDMI OUT jack will be output from DIGITAL OUT jack as well, except that
Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output
instead of DTS-HD.
When “Audio Mute” is selected in “HDMI Audio Out” setting, audio signals output from HDMI OUT jack will be muted
and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting.

To set “Digital Out” setting, select “Audio Mute” in “HDMI Audio Out” setting.

Disc type

Audio recording format

“Digital Out” setting

Bitstream

LPCM

BD-video

Dolby Digital

Dolby Digital

2ch Downmix LPCM

Dolby Digital Plus

Dolby Digital

2ch Downmix LPCM

Dolby TrueHD

Dolby Digital

2ch Downmix LPCM

DTS

DTS*

2ch Downmix LPCM

DTS-HD

DTS*

2ch Downmix LPCM

LPCM

2ch Downmix LPCM*

2ch Downmix LPCM

DVD-video

Dolby Digital

Dolby Digital

2ch Downmix LPCM

DTS

DTS

2ch Downmix LPCM

LPCM

2ch Downmix LPCM

2ch Downmix LPCM

audio CD

2ch LPCM

2ch LPCM

DTS-CD

DTS

2ch Downmix LPCM

* For BD titles with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions

listed below are met:

When “BD Audio Mode” setting is set to “Mix Audio Output”.
When “HDMI Audio Out” setting is set to “Audio Mute”.
When “Digital Out” setting is set to “Bitstream”.

If BD titles do not have secondary or interactive audio, the audio will be output as shown in the table.

This table applies only when HDMI cable is not connected or “Audio Mute” is selected in “HDMI Audio Out” setting.

Note

In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set “BD Audio
Mode” setting to “Mix Audio Output” and set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.

Connecting the AC Cord

After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC
outlet.
Insert the plugs securely. Incomplete connections will result in the generation of noise.

this unit

AC cord

AC 120V, 60 Hz

AC outlet

Supplied cables used in this connection are as follows:

AC cord x 1



E5E20UD_E5H20UD-NB500MG9_EN.indd16 16

E5E20UD_E5H20UD-NB500MG9_EN.indd16 16

2008/02/25 9:30:30

2008/02/25 9:30:30