Function setup – Philips Magnavox NB500MG9 User Manual
Page 38
38
EN
FUNCTION SETUP
How to navigate through “HDMI Multi(LPCM)”.
1
Use [K / L] to select your desired menu item then press [OK].
2
Use [K / L] to select your setting items.
Press [RETURN] to go back to the previous screen.
3
Use [s / B] to select desired options. (Except for “Test Tone” and “Default”.)
For “Test Tone”:
Use [s / B] to select “Off”, “Manual” or “Auto”, then press [OK].
The test tone will be output. If you select “Manual”, use [K / L] to select desired speaker, then use [s / B] to
adjust the volume. If you select “Auto”, use [s / B] to adjust the volume of the speaker that outputs the test
tone.
If you want to stop the test tone, press [RETURN].
For “Default”:
Press [OK] to reset to the default.
4
Press [SETUP] to exit.
Menu
Setting items
Options
Descriptions
Speaker Size
Selects the desired
speaker to set. Then
change the setting
appropriately by
referring to the
descriptions.
Front
Large*
Large:
For the large speakers with strong low
frequency reproduction capabilities.
Small:
For the small speakers which do not
provide strong bass sound.
You cannot change the setting of
“Subwoofer”. If connected device is not
compatible with subwoofer, “Subwoofer”
will be displayed in gray.
Small
Center
Large*
Small
Subwoofer
On
Surround
Large*
Small
Surround Back
Large*
Small
Default
Select “Default”, then press [OK] to reset
“Speaker Size” setting to the default.
Channel Level
Tests or sets the volume
for each speakers.
Test Tone:
“Test Tone” is the
test tone which
can be output
from the speakers
so that you can
adjust the volume
for each speaker.
Off*
Select “Off” to deactivate “Test Tone”.
Select “Manual”, then press [OK] to
manually set the volume for the desired
speaker.
Select “Auto”, then press [OK] to
automatically output the test tone from
each speakers.
Manual
Auto
Front Lch
0 dB to -12 dB
(0 dB*)
If you have selected “Manual” in “Test
Tone”, select the desired speaker to set
and adjust the volume for the selected
speaker.
If you select “Auto” in “Test Tone”, test
tone will automatically be output in order.
Adjust the volume of the speaker that
outputs the test tone.
Center
0 dB to -12 dB
(0 dB*)
Subwoofer
0 dB to -12 dB
(0 dB*)
Front Rch
0 dB to -12 dB
(0 dB*)
Surround Rch
0 dB to -12 dB
(0 dB*)
Surround Back
Rch
0 dB to -12 dB
(0 dB*)
Surround Back
Lch
0 dB to -12 dB
(0 dB*)
Surround Lch
0 dB to -12 dB
(0 dB*)
Default
Select “Default”, then press [OK] to reset
“Channel Level” setting to the default.
•
•
•
E5E20UD_E5H20UD-NB500MG9_EN.indd38 38
E5E20UD_E5H20UD-NB500MG9_EN.indd38 38
2008/02/25 9:30:59
2008/02/25 9:30:59