Metrologic Instruments IS6520 - Manual (Page 9)

2
S CANNER AND A CCESSORIES
The following is a list of the parts included in the IS6520/MS6520 Kit.
• Cubit™ IS6520/MS6520 - Omnidirectional Scanning Engine
•
PowerLink Power Supply - AC to DC Power Transformer.
Regulated 5.2 VDC @ 650 mA output.
One of the following may be included:
120 VAC United States – MLPN 45593
220 VAC – 240 VAC Continental European – MLPN 45591
220 VAC – 240 VAC United Kingdom – MLPN 45592
• PowerLink Cable with built in power jack (IS650-41/MS6520-41only)
One of the following may be included:
Standard - MLPN 54xxx* - 2.1 m (7') straight cord, short strain relief
Or
Optional - MLPN 53xxx* - 2.7 m (9') coiled cord, long strain relief
*xxx specifies connection to the host
• Keyboard Wedge Powerlink and Adapter Cable – MLPN 54-54002
Powerlink cable with a 5-pin DIN female connector and a 6-pin mini Din
male connector and an adapter cable with a 5-pin DIN male connector and
a 6-pin mini DIN female connector.
(IS650-47/MS6520-47 only)
• Mounting Hardware - 3 screws (3 mm) are included for mounting
purposes
• Installation and User’s Guide – MLPN 2421
This guide may be downloaded for FREE from Metrologic’s website
www.metrologic.com.
• MetroSelect ® Scanner Configuration Guide – MLPN 2407
This guide may be downloaded for FREE from Metrologic’s website
www.metrologic.com.
To order additional items, contact the dealer, distributor or call Metrologic's
Customer Service Department at 1-800-ID-METRO
(1-800-436-3876).