Motorola CLS1110 CLS1410 User Manual
Page 29
_
Series Programming Quick Reference
To enter programming mode, press and hold Push to Talk
and
Q
for 3 seconds while turning the radio on. The radio
beeps and displays
k
, the channel number flashes, and the
frequency (indicated by
l
) and code (indicated by
y
)
display alternately.
Set the
Channel*
Press
[
or
]
.
Set the
Frequency
Press
S
until
l
displays.
Press
[
or
]
to change the
frequency.
Set the
Interference
Eliminator
Code
Press
S
until
y
displays.Press [or ] to change
the code.
Set
Available
Channels*
Press
S
until = displays.
Press
[
or
]
to select
number of available channels.
* CLS1410 Only
_
Series Programming Quick Reference
Set a Call
Tone
Press
S
until E display.s
Press
[
or
]
to select1, 2, or
3
for audible call tones, 4 for
VibraCall, or 0 for off (default).
Set the
Microphone
Gain
Press
S
until g and ? display.
Press
[
or
]
to select:
1
Low sensitivity
2
Medium sensitivity
3
High sensitivity
Edit the
Scan List*
Press
S
until h displays and the
channel number and
Y
or
n
flash.
Press
[
or
]
to select the
channel, then press
T
to select
Y
(include channel) or
n
(exclude
channel).