Quiet time, Personal messages, Receiving/ reading a personal message – Motorola Timeport P730 User Manual
Page 4: Ddpddd, Set t ing up, Se tt in g u p
11
Press
x
or
w
to adjust the hour.
Repeat Steps 6 and 7 until you have set both digits of the minutes field and
the method of time measurement (
AM
,
PM
, or
24hr
) field.
If this is a one-time only alarm, also use Steps 6 and 7 to set the month, date,
and year fields. If this is a daily alarm, leave the dashes (
--
) in the date
fields and go to the next step.
Note: Only
AM
or
PM
can be changed. If you are using the
24hr
time
measurement, you cannot change it here.
Press
t
to accept the alarm setting.
In the upper-left corner of the pager,
R
is displayed, indicating the alarm is
set. When the alarm expires,
R
flashes and the pager either vibrates or emits
an audible alert until you press a button. If it is a one-time alarm,
R
disappears from the Status screen after you press a button.
Quiet Time
The pager can receive and store new messages without any alerts for a certain
period of time on a daily basis, regardless of whether the pager is in audible or
silent alert mode. All you have to do is turn Quiet Time on and set the time
period desired. After you turn quiet time on, it activates on a daily basis
(indicated by
W
in the upper-left corner of the pager) until you turn it off.
On the Function menu, press
v
to move to j (SET QUIET TIME).
S
E
TTI
N
G
U
P
12
Press
t
. The Set Quiet Time screen is displayed and the quiet time
indicator (either
7
if off or
c
if on) flashes.
Press
x
or
w
to turn quiet time on (from
7
to
c
) or off (from
c
to
7
). If you
are turning off quiet time, skip to Step 10.
Press
s
to move to the starting hour field.
Press
x
or
w
to adjust the hour.
Press
s
to move to the first digit of the minutes field.
Press
x
or
w
to adjust the first digit of the minutes.
Repeat Steps 6 and 7 for the second digit of the minutes field and for the
method of time measurement field. You can change between
AM
and
PM
, but
if you are using the
24hr
time measurement, you cannot change it here.
Repeat Steps 4 through 8 to enter the ending quiet time setting.
Note: If the end time is equal to the start time, the Quiet Time function
is turned off.
Pager status
Quiet Time
turned off
indicator
H Y
L
›
):))
m )%/)!
START
END
7
12:00
-
12: 00
-
Set Quiet Time Screen example
SET
T
ING
UP
13
When you are finished, press
t
to accept the selected quiet time period.
One of the following indicators is displayed in the upper-left corner of the
screen:
W
- Quiet time on with no unread messages
W
with
H
flashing - Quiet time turned on with stored, unread messages.
H
- Quiet time off with no unread messages.
H
flashing - Quiet time off with stored, unread messages.
Note: When quiet time is turned on and the pager is set for audible alert,
Y
is displayed in the upper-left corner of the pager except during the
actual quiet time period.
SE
TT
IN
G
U
P
14
Receiving/Reading a Personal Message
A flashing
H
in the upper-left corner indicates there is at least one unread
message in your pager. If programmed with reminder alerts, your pager alerts
periodically to remind you there are unread messages. Each flashing personal
message indicator (
D
) on the Status screen represents an unread message. A
non-flashing
D
represents a previously read message. If your pager has not
received any messages, there are no personal message indicators displayed on
the Status screen.
When your pager has received a message and an alert is being emitted use the
following steps to read the message.
Press any button to stop the alert. The new message is automatically stored,
along with the time and date it was received. The Status screen displays the
number of the message (03: in this example because it is in the third
message slot) and the first line of the message.
Pager status
Personal messages
received
First line of new message
HY
L
›
):))
m )%/)!
DDPDDD
R
q
h
a
o
b
03:Call me before you
New Message example
PERSO
NAL
M
E
S
S
AG
ES