Motorola Timeport P730 - Manual (Page 2)

3
Insert the new battery. Make sure you match the positive and negative
markings on the battery with those on the pager housing.
Align the grooves on the battery door with the grooves on the pager housing
and slide the battery door closed.
Slide the battery door lock toward the bottom of the pager to lock the
battery door.
Note: Installing the battery incorrectly could result in resetting the alert
mode and time to their default settings, and in deleting all messages.
GE
T
T
ING
S
T
AR
T
E
D
4
Control Buttons and Status Screen
u
On/Read Used to turn the pager on and to read a
message.
t
Function/
Select Used to display the Function menu and to
select pager settings.
v w x s
Directional Used to move around the display and
through menus.
Button
On/Read
Function/Select
Button
Directional
HY
L ):))
m )%/)!
DDDD
Buttons
Pager
Status
Folders
IbIIIIIILI55555555
R
q h
a
o
b
ESCAPE
eijmk
ezBq h aob
GE
T
T
ING
S
T
AR
T
E
D
5
Turning Your Pager On
ΠPress u to turn your pager on. A start-up message is momentarily
displayed and your pager activates the currently selected alert.
Press any button to stop the start-up alert. While the pager is on and no
activity is taking place, the Status screen is displayed.
Turning Your Pager Off
ΠFrom any screen, press and release t until ESCAPE is displayed. (z is
flashing.)
Press v to move to
e
(TURN OFF).
Press t to turn the pager off. The TURN OFF? prompt is displayed.
Press t again. The pager is now off and the screen is blank.
H Y L
› ):)) m )%/)!
(Blank screen)
Status Screen example
Alert
Mode
(Audible)
Power
On
Battery status
(Full)
Time Day and Date
G
E
TTI
N
G
ST
A
R
TE
D
6
Backlight
Your pager’s display can be illuminated in low light conditions. You can
manually turn the backlight on and off by pressing and holding
t for at least
two seconds.
Sending a Test Page to Yourself
It’s a good idea to test your pager and service by sending a page to yourself.
Start by using the phone number, web site or email address (and PIN, if
required) your service provider gave you, then enter a short message. If you are
sending a word message from a phone, an operator will assist you; otherwise
press the phone buttons to enter a numeric message or type a message and
send it. While you are waiting for the message to reach your pager, refer to
page 14 for more information about how to read a message.
If your pager does not receive the message within a few minutes, contact your
service provider. After you’ve tested your pager, read the rest of this guide to
learn about the many useful features of your new pager.
GE
T
T
ING
S
T
AR
T
E
D