Miller Electric OM-1589 - Manual (Page 20)

OM-1589 Page 14
3-6. Internal Connections for Water-Cooled Gun
Ref. 800 688-B
1 Wire Conduit
2 Thumbscrew
3 Wire Conduit Block
Loosen thumbscrew and insert
conduit into block. Tighten thumb-
screw. Tighten strain relief.
4 Power Block Weld Cable
Connection
5 Weld/Water From Gun Fitting
Y If using a recirculating cool-
ant system, make connec-
tions directly to gun hose
connections at wire feeder.
Maintain a minimum 1 qt/min
flow rate to prevent damage
to gun parts.
6 Water To Gun Fitting
7 Optional Water Flow Switch
Fitting
Tools Needed:
9/16, 11/16 in
2 1
3
7
4 5 6
3-7. Internal Connections for Air-Cooled Gun
Ref. 801 052
1 Wire Conduit
2 Thumbscrew
3 Wire Conduit Block
Loosen thumbscrew and insert
conduit into block. Tighten thumb-
screw. Tighten strain relief.
4 Power Block Weld Cable
Connection
Tools Needed:
9/16 in
2 1
3 4