Memorex MPH6990 - Manual (Page 51)

50
Additional Information
(continued)
For additional set-up or operating assistance, please visit our WEBSITE at
www.memcorpinc.com or contact CUSTOMER SERVICE at 1-800-919-3647.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993.
Symptom Suggestion
The answering system • Make sure the base unit is plugged in.
does not work. • Make sure the answering system is turned on.
The answering system • Set the record time to either the one minute or four
does not answer calls. minute option.
• The memory may be full. Delete some or all of the
saved messages.
Messages are incomplete. • The incoming messages may be too long. Remind
callers to leave a brief message.
• The memory may be full. Delete some or all of the
saved messages.
After a power of failure, • Record your outgoing message again. The default
the outgoing message message should remain.
is deleted.
No sound on the base • Adjust the speaker volume on the base unit.
unit speaker during
call monitoring or
message playback.
Cannot access remote • Make sure you’re using the correct PIN code.
call-in features from • Make sure that the touch-tone phone you’re using
another touch-tone phone. can transmit the tone for at least two seconds. If it
cannot, you may have to use another phone to access
your messages.
UC374BH(MPH6990) OM ENG 6/5/02 8:57 AM Page 50