Memorex MPH6990 - Manual (Page 18)

17
Handset Ringer and Earpiece Volume
Handset ringer tone
In the standby mode, press
▲ or ▼.
Each time ▲ or ▼ is pressed, the ringer tone
setting changes and the selected ringer tone
sounds for 2 seconds.
Handset earpiece volume
During a telephone call, pressing ▲ or ▼ will change
the earpiece volume of the handset. This setting will
remain in effect after the telephone call has ended.
When you press
▲ in Maximum mode or press ▼ in Low mode, an error tone sounds.
Ringer Mute
You can temporarily mute the handset ringer tone. When the handset is off the base
and the phone is ringing, press
OFF . The ringer tone will return to normal starting with
the next incoming call.
Using the Page Feature
To locate the handset (while it’s off the base)
1
Press PAGE/FIND on the base.
2
The handset beeps for 60 seconds.
3
Press any key on the handset or PAGE/FIND on
the base, or return the handset to the base to
cancel the page.
UC374BH(MPH6990) OM ENG 6/5/02 8:56 AM Page 17