Memorex MPH6990 - Manual (Page 40)

39
The Answering Machine
(continued)
Setting Your Outgoing Message (Greeting)
When you receive a call, the answering system automatically plays either a preset
message or your own greeting.
▼ Preset message
The following message is prerecorded:
“Hello, no one is available to take your call.
Please leave a message after the tone.”
Note See “Selecting the message
record time”, on page 36 for how
to set the announce only feature.
▼ Recording a personal outgoing
message (Greeting)
1
Press and hold OGM .
You hear the announcement “Record
greeting” and a tone. The [
]
flashes on the message counter.
2
Start recording your message. You
have 30 seconds, and the message
counter starts to count down [
] to
[ ] every second.
3
When you are finished recording your
greeting, press
OGM or PLAY/STOP .
You hear a tone after your greeting
plays back on the base speaker.
▼ Choosing between the two outgoing messages
Press
OGM . Then press OGM again when the outgoing message is played. This
switches between the prerecorded greeting or the personal greeting. After finishing
playing back the message, a tone is heard.
Note To delete the personal Greeting, press DELETE during the announcement and
the system announces “Greeting has been deleted”.
Notes
• You can record a greeting up to 30 seconds long.
• Position yourself as near to the base as possible and speak clearly when recording
your outgoing message.
UC374BH(MPH6990) OM ENG 6/5/02 8:57 AM Page 39