Moffat GSC 5061 User Manual

Page 25

Table no.2

Air adjusting (mm)

Gas type

Oven

Grill

G20

2,5

25,5

G30

3,5

G31

3,5

Replace the nozzles of the oven burners

Oven burner

To replace the gas oven nozzle, follow this
procedure:
• Check the table no.1 for diameter of nozzle;
• Remove the oven removable base panel;
• Remove the screw on the oven burner rod

at the rear of the oven;

• Remove the oven burner by pushing it

backwards.

• Replace the nozzle by means of a No 10

socket spanner;

Reassemble the parts following the same
procedure in reverse.

Grill burner

To replace the gas grill nozzle, follow this
procedure:
• Remove the grill burner after removing the

fixing screw.

• Replace the nozzle by means of a No 10

socket spanner;

• Refit all parts and test.

Flame adjustment

Oven burners

The burner is correctly adjusted when the flame
is stable, silent and goes out without any noise.

• When the flames are too short, the nozzle is

whistling or the flames have the tendency to
detach from the burner, it means that there is
too much air in the valve. If there is too much
air there is a risk that the flames will
extinguish.

• But, if the flames are too long, soft, lighting,

there is not enough air in the valves. These
flames discolour the bottom of pans.

• Loosen the screw M which fixing the air

adjuster A;

• Move the air adjuster A forward or backward

until achieving the right mixture (see table no.
2);

• Tighten the fixing screw M.

Grill burner

• Loosen the screw fixing the Venturi.
• Move the adjusting collar left or right until

achieving the correct flame picture (see table
no. 2).

• Tighten the fixing screw.

air ad

sti

adjusting collar

screw

opening