MITSUBISHI ELECTRIC MITSUBISHI ELECTRIC DX-TL5716U - Manual (Page 22)

18
You can copy the still image being displayed to a USB memory device or DVD/CD disc as a still or moving image (one-touch copy).
This function is convenient to copy recording data for a short period of time.
1
Set a USB memory or a DVD/CD disc in the
recorder.
The recorder automatically detects the copy destination
device. When both a USB memory device and DVD/CD
disc are detected, the DVD/CD disc is used as the copy
destination device.
2
Display the image you want to copy in the still
image playback mode and the single screen
mode.
See page 14 for the single screen mode.
See page 13 for the still image playback mode.
3
Press the COPY button on the front panel to
display .
4
Select the image to be copied from “Moving
image” or “Still image.”
“Moving image”: Copies data for the specifi ed recording
duration starting from the image being displayed.
“Still image”: Copies 1 GOP including the still image
being displayed.
5
When “Moving image” is selected in step 4, click
the time next to “Duration” until the desired copy
duration appears.
6
Click “Execute copy.”
You can start copying also by pressing the COPY button
on the front panel.
After the completion of copying, check that the COPY
indicator goes out before you remove the DVD/CD or USB
memory.
Copying recorded images
3
Notice
• You cannot perform one-touch copy during copying.
Tips
• When the copy destination DVD/CD disc or USB memory device becomes full during copying, the copying is stopped.
One touch copy
Copy menu ?
Other copy
Archive
5 Min
Camera : 1ch
Start : 07-07-2009 13:25:08
Duration
Copied data
Copy starts also by pressing [COPY].
Moving image Still image
Setting
Setting
Execute copy
E:Exit
4
5
6
2