Maintenance – MGE UPS Systems Pulsar EX 2200RT User Manual
Page 21
3400753300/AE
- Page 21
Indication
Signification
Correction
The outlets are not supplied One of the protection circuit breakers 6 for the
◗
Check that there is not a short-
with power, even though
outlets (on the back of the UPS) is open.
circuit on the outlets.
button 16 is ON
◗
Eliminate any overloads on the
(3200 RT only).
outlets by modifying the
distribution of devices on the
outlets.
LED 26 flashes and
UPS electronics have detected a UPS fault.
◗
Restart the UPS.
the buzzer sounds
Depending on the UPS personalization parameters
continuously.
(see section 3.4).
There are two possibilities:
◗
The equipment connected to the UPS continues to
◗
Call the after-sales support
be supplied, but directly from the AC-power source
department.
(via the automatic bypass (LED 19 ON).
◗
The connected equipment is no longer supplied.
The equipment connected to the UPS is no
longer protected.
4. Maintenance