MSI RG300EX User Manual
Page 45
M S I R G 3 0 0 E X （ L i t e )
14. Click ‘Next’.
15. You will see a brief summary with the settings you have made so far. Click ‘Next’ to continue.
16. Choose ‘WPAPSK’ and click ‘Next’.
17. Choose ‘TKIP’ and click ‘Next’.
18. Fill in the same password in the field ‘Network Key’ you have chosen for your signal booster.
19. Click ‘Next’.
20. Click ‘Finish’.
21. The wizard will now save the settings and will close the screen automatically.
4.4 Connecting your wireless router with the signal booster
(2)
If you have followed the previous steps, then you have filled in the following:
- The signal booster (2) has the following IP-address: ‘192.168.0.200’.
- The wireless router has the following IP-address: ‘192.168.0.1’.
- Both devices are using the WPA protocol and are both using the same security key.
- Both devices are using the same channel.
- The SSID does not need to be the same (e.g. ‘Upstairs’ and ‘Downstairs’).
Both devices must be set up in order to connect to each other. We will begin setting up your wireless
router .
1. Connect the wireless router and the signal booster to each other using the following steps: Connect a
network cable to LAN4 of the wireless router. Connect the other end of the network cable to LAN4 of the
signal booster.
2. Connect a computer using a network cable to LAN port 1 of the wireless router.
3. Turn on your wireless router and the signal booster.
4. Turn on your computer.
5. Open your web browser (e.g. Internet Explorer, Netscape or Firefox).
6. Type ‘http://192.168.0.1’ in the address bar.
7. Click ‘Setup Tool’.
8. Click ‘Advanced Setup’ in the left menu.
Page 44 of 52