Mark Levinson OWNER'S MANUAL N33H - Manual (Page 19)

15
Linking
Linking is available for all Mark Levinson components that offer
Link or
communication ports, including master, slave in,
slave out, , input, and control communication
ports. These communication ports can be used to “link” compatible
Mark Levinson components in a slave chain, allowing them to
share Link controls.
The Nº33H offers two Link communication ports labeled slave in
and slave out. The slave in communication port can be connected
to a compatible Mark Levinson preamplifier that offers Link or
communication ports. The slave out communication port
can be connected to a compatible Mark Levinson power amplifier
that offers Link or
communication ports.
The Nº33H can be connected to the following Mark Levinson
components:
• Nº30 Series preamplifiers, including the Nº32, Nº38, and
Nº38S.
• Nº300 Series preamplifiers, including the Nº320S, Nº326S,
Nº380, and Nº380S.
• Nº400 Series power amplifiers, including the Nº431, Nº432,
Nº434, and Nº436.
• Nº39 and Nº390S CD Processors.
• Refer to the appropriate documentation for Link compatibility
information about other Mark Levinson components.
Making Link • DO use Link or communication ports, such as master,
Connections slave in, slave out, , input, and control
communication ports.
• DO use supplied Link communication cables, which are
provided in the accessory box.
• DO use constructed Link communication cables. Refer to
“Constructing Link Communication Cables” for additional
information.
• DO NOT use RS-232 ports or other rear panel connectors.
Caution!
Link connections must be made using Link or
communication ports and supplied or constructed Link
communication cables. Connections made with other connectors
or cables may damage the Nº33H and other linked components,
possibly voiding the manufacturer’s warranty and/or standard
repair policies.