MTD 12211 - Manual (Page 38)

38
Models 12211 and 12212
PARTS LIST
TRANSMISSION HOUSING, COVERS, SEALS, GASKETS, PLUGS
NOTE 1: These screws are a special sealing screw
that cannot be reused without risking the loss of
transmission oil. If these screws are loosened or
removed, they must be replaced with new screws.
1 9621 Oil Seal (Double Lip), Wheel Shaft ...... 2
2 9726 Pipe Plug, 1/4, ................................... 2
3 97076 Seal, Transmission Bore ..................... 1
4 1186329 Hex Flange Screw, 5/16-18 x 3/4* ...... 6
5 85030 Oil Seal, Input Pinion Shaft ................. 1
6 11513 Transmission Cover (Incl. four Ref. 18
and two ea. Refs. 21 & 22).............. 1
7 20694 Gasket, Transmission Top Cover ........ 1
8 1916197001 Transmission Case Assy. (Incl. Tube
and Rear Housing) .......................... 1
9 9467 Plug .................................................... 1
10 1916198001 Mounting Plate, Wheel Clutch Cable ... 1
11 97073 Oil Seal, Tiller Shaft............................. 2
12 90038 Hex Flange Screw, 5/16-18 x 5/8* ...... 2
13 1916273001 Tiller Housing Cover, left side ............. 1
14 1129-1 Gasket, Tiller Housing Cover, .010"
(fits all covers) ................................ A/R
15 1915089 Screw Kit: Incl. three 1/4-20 x 7/8
Self-Sealing Screws ........................ A/R
16 1115 Rear Bearing Cap ................................ 1
17 1124-2 Gasket, Rear Bearing Cap, .010"
Thick ............................................... A/R
18 1186331 Hex Flange Screw, 5/16-18 x 1* ......... 4
19 1915087 Screw Kit: Incl. five 1/4-20 x 5/8
Self-Sealing Screws ........................ A/R
21 1100243 Lockwasher, 3/8.................................. 2
22 1100068 Hex Hd. Screw, 3/8-16 x 3/4* ............. 2
REF. PART
No. No. DESCRIPTION QTY.
REF. PART
No. No. DESCRIPTION QTY.
* Specify GRADE 5 if ordering part locally.
A/R – As Required