Minicom Advanced Systems IP Control - Manual (Page 10)

IP CONTROL
9
11.1 Static IP addresses for a number of units
Where you want to connect more than 1 IP Control to the same network and there
is no DHCP server, or you want to use static IP addresses, do the following:
Connect the IP Control units one at a time and change the static IP address of each
unit before connecting the next unit.
12. Logging into the Web interface
Complete the initial setup via the Web configuration interface:
1. Open your Web browser (Internet Explorer version 6.0 or higher).
2. Type the IP Control system IP address - https://IP address/config - and press
Enter. The login page appears, see Figure 5.
Figure 5 Login page
3. Type the default Administrator user name - admin - and password - access -
(both lower case).
4. Press Enter. The Web interface opens at the Network Configuration page. See
Figure 6.
5. Bookmark the page for easy reference.
Figure 6 IP Control Web interface