Motorola MD490 - Manual (Page 28)

26
Settin
g
Up
Yo
ur
Ph
on
e and
Expa
nsio
n Han
d
s
e
ts
Setting the Date and Time
Note: If you subscribe to a caller ID service, the date
and time is automatically set after the 2nd ring on an
incoming call.
Action
1 Press MENU ( a ).
2 Scroll to Date/Time and press
SELECT ( a ).
3 Enter the time (2 digits are required for the
hour and 2 digits for the minutes, so use a
leading 0 for 1-digit values).
4 Press AM/PM ( a ) to switch between am
and pm.
Note: This applies only if using a 12-hour
clock.
5 Scroll down ( c ) to move the next field.
6 Press CHANGE ( a ) to change the time
format (12- or 24-hour clock). Scroll down
(
c ) to move to the next field.
7 Press CHANGE ( a ) to select date format
(MM/DD or DD/MM).
8 Scroll down ( c ) to move the next field.
9 Enter the current date.
10 Press DONE ( a ).
11 Press EXIT ( a ) to return to the standby
screen, or
c
to scroll to a different menu
option.
4110W32o.book Page 26 Wednesday, July 16, 2003 2:02 PM