MGE UPS Systems S3 - Manual (Page 14)

Section IV — Maintenance and Service
This section describes maintenance of the Topaz S3 inverter,
including safety instructions, preventive maintenance, and
information about replacement parts, and customer service.
A Glossary in the rear of this manual provides definitions of
terms used within the text.
The sine wave inverter provides stable, distortion-free AC
power from a DC input source, at a selectable output voltage
and frequency, for sensitive equipment which must be
operated in locations where commercial AC power is not
available. With a static switch option, the inverter also forms
a reliable and economical part of uninterruptible power
systems in either on-line or off-line mode. See Section III,
Theory of Operation, for detailed information on inverter
characteristics.
This model is designed for rack mounting in 19 inch, 23 inch,
or 25 inch racks and either flush front panel or center
mountable, depending on the position and location of the
mounting flanges.
Check the model dash number of your unit to make sure it is
the type you need. Standard options are as follows:
Description Product Number s
500VA & 1kVA 2kVA
Topaz S3 Inverter with Status indicators. 63054-92, 63104-92 63204-92
Topaz S3 Inverter with Status indicators,
Digital LCD, and Static Transfer Switch.
63054-94, 63104-94 63204-94
Receptacles:
(4) NEMA 5-15R 6310-R91 6320-R91
(4) IEC-320 6310-R92 6320-R92
Support Bracket Kit (Recommended when using forward mounted brackets) for 19” Rack unit:
Bracket for 23”/25” rack mount: 6310B-N4 6320B-N4
LCD display meter with static switch
Communication interface
Spare kit (63204-94-SK1)
Specifications subject to revision without notice.
1.3 Specifications
1.2 Options
1.1 General Description
1 — 2 86-153061-00 Introduction
S3 Static Inverters 1kVA