Marshall electronic V-R241-DLW - Manual (Page 19)

19
■ User-Definable Function Buttons
Use the Function 1, Function 2, Function 3 and Function 4 menu items to define each function button on the front
panel of the monitor. The following options are available for each button:
• Marker Toggle between different Screen Markers
• Center Marker Display/hide the Center Marker
• Marker Backgrd Change how markers are displayed on the screen
• IMD State Display/hide IMD text
• Anc. Time Code Display/hide time code
• OSD Tally Rotate amongst types of OSD Tally
• Audio Monitor Display/hide audio presence indicator
• CC Monitor Display/hide the Closed Caption Presence indicator
• Waveform Mode Change the data displayed on the Waveform monitor
• Overlay Position Change the position of the WFM Overlay in DLW Overlay Mode
• Limits Toggle the Limits option of the Waveform Monitor On or Off
• Aspect Ratio Toggle between 4:3 and 16:9 aspect ratios
• Pixel to Pixel Enable/disable Pixel-to-Pixel mode
• Ctemp/Gamma Rotate amongst color temperature settings
• Blue Only Enable/disable Blue Only mode
• Monochrome Enable/disable Monochrome mode
■ Saving and Loading User Presets
Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. Each
Preset saves all monitor settings except for IMD configuration.
• Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded
by selecting MFG. (Factory defaults cannot be overwritten.)
•
Use To perform a full system restore, which resets ALL adjustable fields on the monitor to their “fresh-from-
factory” state, press the Power, F1 and F2 button simultaneously. Note: You will lose ALL user adjustable
settings on your monitor.
• Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.