Philips Magnavox 20MC4204/17 - Manual (Page 17)

Menu Language
This affects the language of the TV/DVD’s setup menus and
on-screen display terms. It does not alter the language of TV
programming, Disc subtitles, etc.
● Before you begin, press SELECT to put the TV/DVD
in TV mode.
1 Press SETUP.
2 Press
▲ or ▼ to select LANGUAGE.
3 Press ENTER to select ENGLISH, ESPAÑOL,
or FRANÇAIS. The selected language will flash
inside the [ ].This will be the language of the TV/DVD
setup menus.
4 Press SETUP to remove the menu.
Menu Language, Resetting TV Channels 17
• If you select Spanish or French menus
and need English, press SETUP. Press
▲ or ▼ to select IDIOMA or LAN-
GAGE. Press ENTER repeatedly to
select ENGLISH.Then, press SETUP.
• The TV/DVD cannot change channels
at the Cable Box or Satellite Receiver.
Set the TV/DVD to channel 3, 4, or
AUX. Change channels at the Cable
Box/Satellite Receiver. See page eight.
• If the power fails, you may have to
reset the TV channels.
• You cannot set up TV channels if the
unit is in DVD mode.
2-3
1,4
Helpful Hints
Resetting TV Channels
The TV/DVD may memorize channels when you turn it on
the first time.You may reset channels with these steps.
● Before you begin, press SELECT to put the TV/DVD
in TV mode.
1 Press SETUP.
2 CHANNEL SET UP will be selected. Press ENTER.
3 Press
▲ or ▼ to select AUTO PRESET. Press
ENTER. The TV/DVD scans all channels and memo-
rizes available ones.When scanning is complete, the
TV/DVD will go to the lowest available channel auto-
matically.
To stop channel scanning before it is finished, press
SETUP on the remote.
2-3
1
— TV SETUP —
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF] B
– CHANNEL SET UP –
ADD / DELETE CH (TV)
AUTO PRESET B
— TV SETUP —
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B
20MC4204 04.2.25 9:33 PM Page 17