Monessen Hearth DFS36NVC - Manual (Page 12)

12
71D0532
GENERAL INSTALLATION INFORMATION
REMOVING SCREEN
Remove fireplace screen frame panel by pushing screen frame panel up and out. See Figure 4.
Figure 5 - Canopy Installation
INSTALLING CANOPY
1. Remove the fireplace screen as described in the previous section.
2. Align the canopy with the holes in the top frame. See Figure 5.
3. Secure screws as shown. See Figure 5.
4. Install and tighten side screws. Make sure the canopy is level and secure. Install the fireplace screen.
Figure 4 - Removing Fireplace Screen Frame Panel
NOTE: Fireplace screen must be removed to access log box and to install canopy.
Canopy
Fireplace
Screen
Do not operate the unit without
the screen frame panel and canopy
installed.
W
ARNING