MRV Communications EM316-2SFP - Manual (Page 24)

EM316-2SFP User Guide
P/N 1259003-001 Rev C3
15
4.3 EM316NM[-5] Command Line Interface (CLI)
Command Line Interface (CLI) commands are used to manage the EM316-2SFP module through
network management interfaces. A set of relevant commands is given here with a description of
their function and syntax. A Fiber Driver
® Network Management Module (EM316NM[-5]) must be
installed in the chassis containing the EM316-2SFP to enable this module management access.
For more details on the EM316NM[-5], consult the related manuals or contact your local MRV
representative.
An abbreviated list of CLI commands appears below.
Figure 21 -- EM316NM[-5] CLI commands for EM316-2SFP management
EM316 Commands
get-chassis-info Display chassis information
Slot (Module) Commands
get-module-info Display module information
init-module Initialize specified module to Defaults
reset-module Reset specified module to Saved settings
Port Commands
get-port-info Display port information
get-port-name Show current port name
set-port-name Change the port name
clear-port-name Clear the port name
SFP Port Commands
get-port-dd Get port optics digital diagnostics information
get-sfp-poll Display SFP polling interval
set-sfp-poll Set SFP polling interval
Console Commands
banner Display banner