MRV Communications EM316-2SFP - Manual (Page 16)

EM316-2SFP User Guide
P/N 1259003-001 Rev C3 7
Step 2.
Install the module inside a Fiber Driver chassis by aligning the edge of the card with the
rail of the chassis. Tighten the thumbscrew by hand.
Figure 7 -- Module installation (not all chassis are shown)
Handle the module by the edges to avoid damaging any components. Follow all ESD
precautions listed at the front of this manual. Use your thumb to push the module securely into
the chassis slot. Do not use excessive force, but make sure the module connector is fully
inserted in the chassis. Secure the module by hand using the thumbscrew.
Figure 8 -- Correctly inserted Fiber Driver module in a powered chassis