Mazda 2007 3 4-DOOR - Manual (Page 252)

Black plate (251,1)
Accessory Sockets
í
The ignition switch must be in the ACC
or ON position to prevent the battery from
discharging.
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 7 A).
CAUTION
To prevent accessory socket damage or
electrical failure, pay attention to the
following:
l Don't use accessories that require
more than 120 W (DC 12 V, 7 A).
l Don't use accessories that are not
genuine Mazda accessories or the
equivalent.
l Close the cover when the accessory
socket is not in use to prevent
foreign objects and liquids from
getting into the accessory socket.
l Correctly insert the plug into the
accessory socket.
NOTE
To prevent discharging the battery, don't
use the socket for long periods with the
engine off or idling.
When placing an electrical device (e.g.
cellular phone) in the tray which is
connected to the accessory socket, pass
the connection plug cord through the slot
in the cap.
Cap slot, closed
Cap slot, opened
1. Open the lid by pulling the upper
release catch.
2. Remove the tray mat.
3. Using a coin, turn the cap
counterclockwise (about 45° from the
closed position) and remove it.
NOTE
Do NOT discard the cap.
Interior Comfort
Interior Equipment
6-67 í
Some models.
Mazda3_8V66-EA-06F_Edition2 Page251
Friday, May 26 2006 10:55 AM
Form No.8V66-EA-06F