Mercedes-Benz S-Class - Manual (Page 159)

157
Controls in detail
Control system
Trip computer menu
Use the trip computer menu to call up sta-
tistical data on your vehicle. The following
information is available:
Fuel consumption statistics after start
̈ Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
̈ Press button j or k repeatedly
until you see this message in the left
display:
AFTER START .
1 Distance driven since start
2 Time elapsed since start
3 Average fuel consumption since start
4 Average speed since start
Incorporating statistics from the previ-
ous journey in the consumption statis-
tics
When you restart the engine, the
AFTER START . display flashes for:
ț a distance of approximately 1.25 miles
(two kilometers)
or
ț a duration of two minutes
During this period, the data from the previ-
ous journey can be incorporated as fol-
lows:
̈ Press the reset button J in the instru-
ment cluster ( ୴ page 140).
The statistics will be incorporated.
Function Page
Fuel consumption statistics after
start 157
Fuel consumption statistics
since last reset 158
Resetting fuel consumption sta-
tistics 158
Call up range (distance to empty) 158
i
Each time you call up the trip comput-
er, the last function used appears as
the first display.
i
If you do not press the reset button J,
the consumption statistics will be reset
to
0 .