Murphy Diagnostic Display PV10 User Manual
Page 2
Warranty - A limited warranty on materials and workmanship is given with this FW Murphy product. A copy of the warranty
may be viewed or printed by going to www.fwmurphy.com/support/warranty.htm
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
MURPHY, the Murphy logo, MurphyLink
™
and PowerView
™
are registered and/or common law trademarks of Murphy Industries, Inc. This document,
including textual matter and illustrations, is copyright protected by Murphy Industries, Inc., with all rights reserved. (c) 2008 Murphy Industries, Inc.
Product Dimensions
Specifications
Operating Voltage
6.0 VDC minimum to 36 VDC maximum
Power Supply Operating Current
460mA max @ 12VDC
810mA max @ 24VDC
Reversed Polarity: Withstands reversed battery
terminal polarity.
Environmental
Operating Temperature: -40
°C to 70°C
(-40
°F to 158°F)
Storage Temperature: -55
°C to 85°C
(-67
°F to 185°F)
Sealing
:
IP68
CAN Bus: SAE J1939 compliant
Connectors
4-pin AMP ”Mini-universal Mate-N-Lok connector”
AMP Plug: P/N 172338-1
AMP Socket: P/N 171639-1 (4 each, assumes 18
gauge wire. See AMP Plug specification to match
socket and wire size.)
Maximum Panel Thickness: 3/8 inch (9.6 mm)
Shipping Weights (all models): 0.2 lb. (0.1 kg.)
Shipping Dimensions (all models): 3-7/8 x 2-3/4 x 2-3/4
in. (98.4 x 69.85 x 69.85 mm)
How to Order
Accessories
Wiring Harness, PVW-PDA-12 PowerView 10 CAN and Power (P/N 78-00-0613)
Wiring Harness, PA-30 PowerView 10 Loose Wiring (P/N 78-00-0614)
Terminating Resistor, PVMJR (PN 78-00-0480)