Philips Magnavox MDV650R - Manual (Page 75)

73
Picture settings
You can select the following functions in this menu:
Picture
TV shape 16:9
Black level shift Off
Video shift ï
' TV shape'
The picture signal can be adjusted to fit your TV:
' 4:3 letterbox' for a 'wide-screen' display with black bars on the top and bottom
'4:3 panscan' for a full-height picture with the sides trimmed
' 16:9' for wide-screen TV
' Black level shift'
Adapts the color dynamic for NTSC playback when set to ON.
' Video shift'
This allows you to move the picture left or right using the D , C buttons in order to adjust
the picture to your TV screen.
Sound settings
Depending on the audio outputs being used, this menu provides you with a selection of settings.
If you are only using the analog audio outputs (red and white AUDIO OUT L/R), select 'Off' in
the 'Digital output' menu.
Sound
Digital output All
Analog output Stereo
Night mode Off
' Digital output'
You can select from the following settings for devices connected to the DIGITAL AUDIO
OUT jack.
' All': Dolby Digital and DTS signals are going out unchanged to the digital output. MPEG-2
Multi-channel signals are converted to PCM (Pulse Code Modulation).
Use receivers/amplifiers with a digital Multi channel sound decoder.
' PCM only' : Dolby Digital and MPEG-2 Multi-channel signals are converted to PCM (Pulse Code
Modulation).
Use receivers/amplifiers without a digital Multi channel sound decoder.
' Off' : digital output turned off.
Use devices with an analog audio input.
ENGLISH
User preferences