Morphy Richards Storm hard floor cylinder vacuum cleaner - Manual (Page 7)

7
Changing the
dustbag
If suction power is reduced or if the ‘dust
bag full’ indicator ‹ is permanently fully red,
the dust bag needs changing. Also check
whether the suction hose, tube or nozzle are
blocked.
To access the dust bag, press the dust
compartment release lever „ to open the
cover.
1 Pull the tab on the dust bag to one side
so that the opening is hygienically sealed.
2 Pull out the dust bag holder and dust bag
in an upward direction.
3 Pull the bag sideways out of the holder.
4 Dispose of the bag with your household
waste.
5 Insert a new dust bag in the holder.
6 Replace the dust bag holder and close
the cover.
IMPORTANT: The dust bag compartment
cover can only be closed once a dust bag
has been correctly fitted.
70312 Rev 2 15/10/04 11:14 AM Page 7