Murray TM6100X5A - Manual (Page 19)

19
F-050204L
SLOPE GUIDE
Use
this guide and do not trim on a slope greater than 15 degrees.
A 10 degree slope is a hill that increases in height at approximately 1.7 feet in 10 feet.. A 15 degree slope is a hill that increases in height at approximately 2.5 feet in 10 feet..
Use
extreme care at all times and avoid sudden turns or maneuvers. Follow other instructions in this
manual
for safety in trimming on slopes. Operate a trimmer
across the face of slopes,
never up or down
slopes.
Use extra care when operating on or near slopes and obstructions.
10 DEGREES
15 DEGREES
Operate a trimmer across the face of slopes, never up or down slopes.
SIGHT AND HOLD THIS GUIDE LEVEL WITH A VERTICAL
TREE, A CORNER OF A STRUCTURE, A POWER LINE
POLE, OR A FENCE.