Motorola Digital Cordless Phone D1004 - Manual (Page 31)

Advanced settings 31
8.7 Select a base
You can register your D1000 handset with up to 4 bases.
Once registered, you can switch between bases, for
example, bases at home and at work.
1. Press
m
and scroll
d
to ADVANCED SET and press
m
.
2. Scroll
d
to REGISTRATION and press
m
.
3. SELECT BASE is displayed. Press
m
.
- The available bases are displayed with the current
base number flashing.
4. Enter the number of the base you want – 1,2,3 or 4 and
press
m
.
- When the base is found you hear a beep. If not found,
the display shows UNREGISTERED .
8.8 Unregister a handset
1. Press
m
and scroll
d
to ADVANCED SET and press
m
.
2. Scroll
d
to UNREGISTER and press
m
.
3. Enter the 4 digit master PIN and press
m
.
- Display shows the registered handset numbers.
4. Scroll
u
or
d
to select the handset you want to delete
and press
m
.
- UNREGISTERED is displayed on the handset screen.
8.9 PIN
The 4-digit master PIN is used when registering or
unregistering a handset and when changing some settings
on your D1000. The default setting is 0000. You can change
this PIN for more security.
1. Press
m
, scroll
d
to ADVANCED SET and press
m
.
2. Scroll
d
to PIN . Press
m
.
3. Enter the current 4 digit master PIN and press
m
.
(Default setting 0000).
4. Enter the new PIN and press
m
.
NOTE
Make a note of your PIN. If you forget your PIN you will
need to reset your product.
8.10 Reset
This will reset your D1000 to its default settings.
1. Press
m
, scroll
d
to ADVANCED SET and press
m
.
2. Scroll
d
to RESET UNIT . Press
m
.
3. CONFIRM? is displayed. Press
m
.
NOTE
Entries stored in the phonebook are retained. After reset,
depending on your country, the welcome mode setting may
be shown on the handset display.