Motorola Digital Cordless Phone D1004 - Manual (Page 18)

18 Phonebook
4.5 Enter a pause
If your D1000 is connected to a switchboard, you may need
to enter a pause in a stored number. This gives the
switchboard time to get an outside line. A Pause is normally
stored after the switchboard access code (e.g. 9)
1. When storing a number, press and hold
#
until the
display shows P. You can then continue storing the
phone number.
4.6 View an entry
In standby:
1. Press
d
.
2. Enter the first letter of the name to search alphabetically
then scroll
u
or
d
to the exact entry. The name is
displayed.
3. Press
e
to display the number. If there are more
than 12 digits, press
e
again to see the rest of the
number.
4. Press
>
to return to standby.
During a call:
1. Press
m
twice to open the phonebook menu.
2. Enter the first letter of the name you want then scroll
u
or
d
if necessary to the exact name. Press
e
to
display the number. If there are more than 12 digits,
press
e
again to see the rest of the number.
3. Press
>
to cancel the phonebook display.
4. Press
>
again to end the call.
4.7 Edit an entry
1. Press
d
.
2. Scroll
u
or
d
to the entry you want to edit and press
m
. EDIT ENTRY is dsplayed. Press
m
again.
3. Edit the name and press
m
to confirm. Use
e
to
delete characters.
4. Press
m
and edit the number.
5. Press
m
to confirm.
6. Scroll
u
or
d
to select NO GROUP , GROUP A , B or C and
press
m
to confirm.
7. Press
>
to return to standby.
4.8 Delete an entry
1. Press
d
.
2. Scroll to the entry you want to delete and press
m
.
3. Scroll
d
to DELETE ENTRY and press
m
.
4. Display shows CONFIRM? . Press
m
.