Motorola MT 1500 - Manual (Page 45)

MT 1500 Model 1.5 33
Common Radio Features
Conventional Scan Only
Make a Dynamic Priority Change
While the radio is scanning, the dynamic priority change feature lets
you temporarily change any channel in a scan list (except the
priority-one channel) to the priority-two channel. The replaced
priority-two channel becomes a non-priority channel. This change
remains in effect until scan is turned off, then scanning reverts back
to the preprogrammed state.
1 When the radio is locked
onto the channel to be
designated as priority-two,
press the preprogrammed
Dynamic Priority button.
Note: The priority-one channel
cannot be changed to
priority-two.
2 The radio continues
scanning the remaining
channels in the list. To
resume scanning the
preprogrammed priority-two
channel, you must leave and
re-enter scan operation.
MT1500 1.5 UG.book Page 33 Thursday, May 8, 2008 11:17 AM