beautypg.com

Mercedes-Benz 2002 ML 320 User Manual

Page 100

background image

97

Exterior lamp switch

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Exterior lamp switch

Rotate switch

$ to positions:

D Off
U Automatic headlamp mode, see page 99.
C Parking lamps (also side marker lamps, taillamps,

license plate lamps, instrument panel lamps).
Canada only: When the engine is running, the low
beam is additionally switched on.

õ Parking lamps plus low beam or high beam

headlamps (switch pushed forward).

ƒ Standing lamps, left or right side (depending on

turn signal switch position). Turn key in steering
lock to position 0 or remove.

Standing lamps, left – move stalk to position (5).

Standing lamps, right – move stalk to position (4).

Move stalk to positions:

1

Low beam (exterior lamp switch position

õ)

2

High beam (exterior lamp switch position

õ)

3

High beam flasher (high beam available
independent of exterior lamp switch position)

4

Turn signals, right

5

Turn signals, left

To signal minor directional changes, such as changing
lanes on a highway, move exterior lamp switch briefly to
the point of resistance only and release. The turn
signals blink three times.

To operate the turn signals continuously, move the
exterior lamp switch past the point of resistance (up or
down). The switch is automatically canceled when the
steering wheel is turned to a large enough degree.

Auto

P54.25-2478-26

This manual is related to the following products: