MITSUBISHI ELECTRIC SD200U - Manual (Page 28)

EN – 28
Specification of RGB signals in each computer mode of the projector (For SD200U)
• When the EXPAND MODE of FEATURE menu is
set to real screen display, by pressing the EX-
PAND button on the remote control, it will switch
to the screen displaying the picture as its original
size (real screen display). In the real screen
display, pictures will be black-framed when
picture resolution is lower than 800 x 600.
Important:
• Some computers may not be compatible with the
projector.
• The projector's maximum resolution is 800 x 600
pixels. It may not display correctly for the pic-
tures of higher resolutions than 800 x 600.
• The picture with a SYNC on G (Green) signal may
jitter.
• The picture with a SYNC on G (Green) signal may
be tinged with green.
• If the resolution and frequency of your computer
are not shown on the table, change the resolution
of your computer. You may find the compatible
resolution and frequency.
Signal mode resolution horizontal Vertical Normal mode Real mode
(H x V) frequency (kHz) frequency (Hz) (H x V) (H x V)
TV60 – 15.73 59.94 800 x 600 –
TV50 – 15.63 50.00 800 x 600 –
525p – 31.47 59.94 800 x 600 –
1080i – 33.75 60.00 800 x 450 –
720p – 45.00 60.00 800 x 450 –
PC98 640 x 400 24.82 56.42 800 x 500 640 x 400
CGA70 640 x 400 31.47 70.09 800 x 500 640 x 400
CGA84 640 x 400 37.86 84.14 800 x 500 640 x 400
CGA85 640 x 400 37.86 85.08 800 x 500 640 x 400
VGA60 640 x 480 31.47 59.94 800 x 600 640 x 480
VGA72 640 x 480 37.86 72.81 800 x 600 640 x 480
VGA75 640 x 480 37.50 75.00 800 x 600 640 x 480
VGA85 640 x 480 43.27 85.01 800 x 600 640 x 480
SVGA56 800 x 600 35.16 56.25 800 x 600 800 x 600
SVGA60 800 x 600 37.88 60.32 800 x 600 800 x 600
SVGA72 800 x 600 48.08 72.19 800 x 600 800 x 600
SVGA75 800 x 600 46.88 75.00 800 x 600 800 x 600
SVGA85 800 x 600 53.67 85.06 800 x 600 800 x 600
XGA43i 1024 x 768 35.52 86.96 800 x 600 800 x 600
XGA60 1024 x 768 48.36 60.00 800 x 600 800 x 600
XGA70 1024 x 768 56.48 70.07 800 x 600 800 x 600
XGA75 1024 x 768 60.02 75.03 800 x 600 800 x 600
XGA85 1024 x 768 68.68 85.00 800 x 600 800 x 600
MAC13 640 x 480 35.00 66.67 800 x 600 640 x 480
MAC16 832 x 624 49.72 74.55 800 x 600 800 x 600
MAC19 1024 x 768 60.24 75.02 800 x 600 800 x 600
MAC21 1152 x 870 68.59 74.96 800 x 600 800 x 600
HP75 1024 x 768 62.94 74.92 800 x 600 800 x 600
Specifications (continued)
• Set the COMPUTER INPUT in SIGNAL menu to
RGB, when inputting the HDTV signal as RGB signal.
• When the COMPUTER INPUT in the SIGNAL
menu is set to RGB and a 525p signal is inputted,
the image will be projected in the VGA 60 format.
In this case, select YC
B
C
R
/ YP
B
P
R
for the COM-
PUTER INPUT, and the format will be changed
to 525p automatically.
• A TV60 or TV50 signal corresponds to component
video signal only. When the RGB signal with 5
line form is inputted, the image will not be pro-
jected correctly.
• When an unspecified signal is inputted, the
projector may not work correctly.