MPI Technologies LaserJet 2100 User Manual

Page 7

EMULATION
Defines the type of IPDS printer to emulate.

Range:
3812

3816
4028

Default:
4028

DEFAULT CODEPAGE
Defines which codepage to use as printer default.

Range:
1..65534 (0xFFFE). Validated when the ppd line opens.

Default:
500

REPORT MARGINS TO SYSTEM

Defines whether the margins should be reported in the OPC reply or not. If not,
the entire page is reported as the printable area.
Range:

YES, NO.
Default:

VPA CHECK
Defines which margins should be used to determine the existence of a VPA

exception condition, which must be reported to the system.
Range:
MARGINS

PHYSICAL PAGE
IPDS LOGICAL PAGE

NONE.
Default:

PHYSICAL PAGE

Note: VPA CHECK=MARGINS will be changed to PHYSICAL PAGE if the margins
are not reported to the system.

PRINT OFFSET X
Defines X-offset to move the output print position. The value is defined in 300 dpi

dots.
Range:

-999..999
Default:

0

PRINT OFFSET Y

Defines Y-offset to move the output print position. The value is defined in 300 dpi
dots.

Range:
-999..999

Default:
0

ADD MARGINS
Defines whether the printable area margins should be added to the IPDS LPP

(Logical Page Position) or not.