Aix (version 4.2) for ppd, Device parameter setup, 6 aix (version 4.2) for ppd – MPI Technologies LaserJet 2100 User Manual
Page 29: 1 device parameter setup
6 AIX (version 4.2) for PPD
For a description of PSF for AIX, please see the IBM manual, IBM Print Services
Facility for AIX: Print Administration version 2.1, Doc. no. S544-3817-02.
6.1 Device Parameter Setup
1. From smit, enter the main menu and select PSF for AIX - Printing and
Configuration
2. Here, you continue through the following screens by selecting Administer
PSF for AIX, Manage a PSF for AIX Printer and Show/Change
Characteristics of a Printer
3. Now select Device Options and select your device.
4. On the screen TCP/IP-Attached Printer Device Options, type
Internet ADDRESS, PORT number (5001 if you use LinkCom or
HostCom, otherwise 9100) and the value you want for Connection
TIMEOUT in seconds.
5.
After changing the values, you must go back to the main screen, select
PSF for AIX - Printing and Configuration and then Bring Queues Up
and Down to stop and start the queue for the changes to take effect.
29