MPI Technologies LaserJet 2100 - Manual (Page 17)

A printout should look like the following:
QPQXWAFP
--------
DEVD HP_IPDS
IPDSPASTHR *YES
TCPIP *YES
RMTSYS 192.194.134.90
PORT 9100
ACTTMR *NOMAX
RLSTMR *SEC15
SBP *NO
PSC *YES
DRF *NO
DRR *NO
EDGSNSTV *NO
Then do the following:
Ping the IP address to verify communication with the printer:
PING ’192.194.134.90’
Vary the printer on:
VRYCFG HP_IPDS CFGTYPE(*DEV) STATUS(*ON)
Start the print writer:
STRPRTWTR HP_IPDS
4.4 AS/400 Settings for Version 3.7
To configure IPDS on AS/400 V3R7, you use the following commands:
- CRTDEVPRT
- CRTPSFCFG
4.4.1 Configuring PSF with CRTDEVPRT on V3R7
At the AS/400 command line, enter a command in the form:
CRTDEVPRT DEVD(HP_IPDS) DEVCLS(*LAN) TYPE(*IPDS)
MODEL(0) LANATTACH(*IP) AFP(*YES) PORT(9100)FONT(11)
FORMFEED(*AUTOCUT) RMTLOCNAME('192.194.134.90)
USRDFNOBJ(AFP/NETWRKPRT *PSFCFG) TEXT('IDATA IPDS
DIMM')
17