beautypg.com

Available on-screen format sizes – MITSUBISHI ELECTRIC LT-2240 User Manual

Page 54

background image

54

Format (picture shape) availability based on Input/Signal

NOTE: You can find aspect ratios on the back of most DVD covers. Also, Anamorphic DVDs are usually

marked “Anamorphic” or “Enhanced for 16:9 TVs.”

Available On-Screen Format Sizes

Zoom

Enlarges the picture, cropping some of the image
at each side, top and bottom. The Zoom format
is useful to remove or reduce the black top and
bottom bars on Anamorphic DVDs with 2.35:1
aspect ratio.

Note: Zoom is not available with 1080i/720p

signal.

Stretch

Default format for ANT and Inputs 1-2. The
Stretched format stretches narrow 4:3 images
across the screen, however, there is less stretch in
the center than the sides.

Note: Stretch is not available with 1080i/720p

signal.

Stretch Plus

Similar to Stretch mode. To minimize distortions
on the side, the picture is expanded to crop off
portions of the top and bottom. Useful when no
important information is shown at the top and/or
bottom of the screen.

Note: Stretch Plus is not available with 1080i/

720p signal.

Narrow

Displays narrow 4:3 images in their original shape
and adds stationary gray side bars to fill the screen.

Note: Narrow is not available with 1080i/720p

signal.

Wide (PC)
This format is only available with PC signal.

Standard

Default format for DTV and Component Input
displays a full-screen format. The Standard format
displays Anamorphic DVDs that have the 1.78:1 or
1.85:1 aspect ratios. However, Anamorphic DVDs
that have the 2.35:1 aspect ratio still display black
bars at the top and bottom of the screen, while
narrow (4:3) images are stretched evenly from side
to side.

Expand (480i/480p)

Enlarges the picture, cropping some of the image at
the top and bottom. The Expand format is useful
to reduce the letterbox top and bottom bars of
non-Anamorphic DVDs or to correct narrow
4:3 images that have been stretched in the
Standard format.

Note: Expand is not available with 1080i/720p

signal.

HD Expand (1080i/720p)

Enlarges the picture to fit the screen vertically,
cropping some of the image on both sides. This
format is useful to remove or reduce black side bars
on HD broadcasts of 4:3 images with black bars
(See page 55).

Note: HD Expand is only available with 1080i/

720p signal.

INPUTS

Standard

Expand

480i/480p

Expand HD

1080i/720p

Zoom

Stretch

Stretch Plus

Narrow

Wide

ANT

YES

YES

NO

YES

YES

YES

NO

Input-1

YES

YES

NO

YES

YES

YES

NO

Input-2

YES

YES

NO

YES

YES

YES

NO

Component-1 or 2 (480i/480p)

YES

YES

NO

YES

YES

YES

NO

Component-1 or 2 (1080i/

720p)

YES

NO

YES

NO

NO

NO

NO

DVI (480i/480p)

YES

YES

NO

YES

YES

YES

NO

DVI (1080i/720p)

YES

NO

YES

NO

NO

NO

NO

PC

NO

NO

NO

NO

NO

YES

YES

This manual is related to the following products: