MITSUBISHI ELECTRIC EXTRON 4XIXIXIXIXI User Manual

Page 5

Extron • System 4

Switcher Series • User’s Manual • P/N 68-401-02 Rev. C

Configuration and Connections

Mitsubishi Installation

Page 5

6. Plug the 15-pin HD connector of the Projector Communications Extension cable

(shown as CC 50') into the PJ Comm port on the System 4

. The other end

plugs into the other 9-pin male D connector on the Comm Adapter (mentioned in
Step 5).

______ Secure all of the connector screws.

7. Plug the (4 or 5) BNC connectors from one end of the (user-supplied) RGBS/HV

cable onto the System 4

output and those on the other end onto the matching

BNCs on the Mitsubishi VS projector connector panel. See connection diagram
below.

System 4

Series – Mitsubishi VS Projector Connections

Use the illustration below as a guide when connecting the System 4

to a

Mitsubishi VS projector. Refer to Mitsubishi VS documentation to continue the
installation.

____________ In a rack mount, do NOT allow the weight of the cables to be supported by the

System 4

. See page 2-5 for cabling guidelines.

__________ System 4

channel numbers correspond to the projector’s “Group” numbers.

26-473-01
"E"

"E"