Setting the power level – Motorola HT1250 User Manual
Page 32
30
English
R
ADIO CALLS
SETTING THE POWER LEVEL
B
Each channel in your radio has a predefined
transmit power level that can be changed.
•
High power (
S
) allows you to reach a radio
that is farther away.
•
Low power (
R
) conserves the battery’s
charge.
•
Auto power automatically sets the optimal
power level based on the strength of the
signal received. If the received signal is
weak, the transmit level will be set to high,
and vice-versa.
Note: Be aware that a message received
from a nearby radio might change
your radio’s power level to low. This
may cause radios that are farther
away not to receive your transmis-
sions.
To set the power level:
Press the preprogrammed Power Level button
(see page 10) to toggle between low and high,
–
or–
Do the following:
2
+
or
?
until
Utilities
3
)
to select
Utilities
4
+
or
?
until
Squelch
5
)
to select
Squelch
6
+
or
?
until
or until
7
)
to confirm your selection.
1
)
to enter Menu Mode.
2
+
or
?
until
Utilities
3
)
to select
Utilities
4
+
or
?
until
Power Level
5
)
to select
The display shows the current power level.
Utilities
Utilities
Squelch
Squelch
Sqlch Tight?
Sqlch Normal?
Utilities
Utilities
Power Level
Power Level
Radio_call.fm Page 30 Monday, September 30, 2002 2:09 PM