Maytag MDG-30 - Manual (Page 36)

32
2) Press the "E" on the touchpad of the keyboard.
3) The L.E.D. (light emitting diode) display will quickly show "Ld30," "LC04," "F180." The dryer will
start, and the L.E.D. (light emitting diode) display will show "dr30."
b. Dual Timer Dryers
1) Turn drying timer knob for a time of 20 minutes.
2) Select "High Temp."
3) Push "Push To Start" switch.
4) To stop dryer, open the main door.
K. SHUT DOWN INSTRUCTIONS
If the dryer is to be shut down (taken out of service) for a period of time, the following MUST BE performed;
1. Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.
2. Discontinue the heat supply:
a. GAS MODELS discontinue the gas supply.
1) SHUT OFF external gas supply shut-off valve.
2) SHUT OFF internal gas supply shut-off valve located in the gas valve burner area.