Maytag 53-3442 User Manual

Automatic dryer, Installation instructions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLATION INSTRUCTIONS

AUTOMATIC DRYER

PLEASE READ ALL INSTALLATION

INSTRUCTIONS AND REQUIREMENTS

BEFORE INSTALLING

A WARNING

FOR YOUR SAFETY

Do not store or use gasoline or other

flammable vapors or liquids in the
vicinity of this or any other appliance.

-TOOLS REQUIRED-

DEEP WELL DRIVER

V;’ DRIVER

CHANNEL LOCK PLIERS

OR ADJUSTABLE WRENCH

SCREWDRIVER

(BLADE & TORX)

PUTTY KNIFE DUCT TAPE

INSTALLING YOUR NEW DRYER

FOR YOUR SAFETY AND THE PROPER OPERA

TION OF YOUR NEW DRYER, THE DRYER

MUST BE INSTALLED IN ACCORDANCE WITH
ALL THE INSTALLATION REQUIREMENTS.

All literature should be removed from inside dryer and
saved for future reference.

NOTE; DO NOT RAISE OR LOWER THE DRYER BY

THE BACKGUARD.

1. To remove the corrugated crate base, place your

foot on the base close to a leveling foot. Pushing

down firmly with your foot, tilt the dryer away from
you.

2. Repeat process with all leveling feet (4). Remove

excess base by hand.

P/N 53-3442

BACKGUARD

Table of contents