Motorola SB4101 - Manual (Page 54)

47 X
Home Print Exit
Introduction Before You Begin Installation Configuration Troubleshooting Legal
Removing the USB Driver from
Windows 2000 and Windows Me
6 The window on the left is displayed. Be sure that the USB Cable Modem is
disconnected. Click Remove Driver.
Depending upon how the device was removed early on in the process, all of the files
may not be shown as Successfully Removed and some of the files may be
displayed as Not Found. If a file displays a status of Not Found, Windows 2000 or
Windows Me removed the file during the Add/Remove Hardware Wizard portion of
this de-installation procedure.
7 Once you have removed the USB device, repeat the Windows 2000 USB
Installation procedure to reinstall the SB4101 with a USB device.
If you have problems, please call us toll-free at 1-877-466-8646.